How to Fix Epson Printer in Error State Windows 10?

You might be wondering how to fix the printer in error condition Epson Windows 10. To begin troubleshooting, turn off your printer and remove the printer's power adapter from the electrical socket. After roughly two minutes, connect the power adapter to the electrical outlet and switch on the printer to see whether the problem has been fixed. If the problem persists, follow the procedures below to resolve it, Epson Printer in an error state Open the access door of the printer and locate the ink cartridges.

Remove the ink cartridges and check if the ink levels are sufficient. If it is low or empty, replace the cartridge immediately.

Now, remove the printhead and clean it with a cloth soaked with lukewarm water.

Let the printhead dry. Once it dries completely, put it back to its actual slot and close the printer access door.

Ensure that your printer is connected to the correct wireless network. Check if the printer and the device you are printing from are connected to the same WiFi network.

Check if your computer is installed with the latest version of the printer software.